David Andrews Brake Cross beams

After the vacuum cylinder, I started to look at the brakes. The crossbeams came with brass castings for the clevises that fit around the etched pull rods.

David Andrews Clevis Castings

However amongst the bags of extras were some really nice Hobbyhorse castings for clevises designed to take round rod rather than the flat etches. I made some adjuster nuts to enhance the rods and fitted them to one end. I will fit the the other end once I know exactly how long the pull rods need to be. 

David Andrews Princess Brake Cross Beams
David Andrews Princess Brake Cross Beams

Next job is to drill out the Castings for the brake hangers/shoes.