At the beginning of each session on the B16 recently I have sprayed the All 3rd in either Carmine, matt varnish or lastly masked up and sprayed the black.
Ian Kirk All 3rd Paint job
Ian Kirk All 3rd Paint job
Ian Kirk All 3rd Paint job
The paints were both from the Vallejo Model colour range – Carmine and Black. The varnish used was Ronseal water based let down with Vallejo thinners.
I also made a start on adding the teak varnish to my Kirk Parcels van.
Ian Kirk 51 ft Parcels van – A start on the teak finish
Ian Kirk 51 ft Parcels van – A start on the teak finish
Ian Kirk 51 ft Parcels van – A start on the teak finish
Again the finish is Vallejo Model Colour Orange covered by (so far) 7 coats of Ronseal waterbased Teak varnish applied by brush so not let down.