I am back on the trail of Kirk coach builds,  this time it’s an all 3rd/brake 3rd twin set (Diags 105/125).

It’s for the gent that I built the last two for and this time he has gone for using the supplied Kirk bogies so I thought that I might upgrade them a little.

First I added some of my Silhouette cut leaf springs and then looked to make some springs for the bolsters.

I am aware that others have used 2ba screws to do represent the bolsters springs but to my mind the coils are a little too sharp in profile so I wound some 3mm styrene rod with 0.8/mm styrene rod to make the springs.

I also added the spring carriers and in hindsight I should have added the springs before sticking the carriers to the bogies because it’s going to be interesting getting the springs in position now.

I have also assembled the sides but didn’t take photos of them.