Pretty much all of the external detailing is now complete. Studying the only photograph that I have of the rear of the tender (LMS Loco Profiles No4 Page 84) I noted that there was a small fitting with what initially looked like a single outlet pipe. Which is how I fitted the small casting, that I found tucked away in the corner of the castings bag.

However, having checked the Finney Duchess instructions and then looking at an a scanned and enlarged view of the fitting it seems that there is indeed a second pipe so I will need to revisit it and fit a second pipe if I can.

I have posted elsewhere of the lamp irons that I milled from recycled plug pins but I haven’t showed them fitted.