A bit more playing with rusting things out. This time it’s a pipe.

I started with a short length of evergreen tube. I attacked it with me dremel and a diamond ball burr to thin the ends to make them look corroded and then I ground a hole from both inside and out again to simulate corrosion. Then a coat of primer filled with talc and various Vallejo browns and rusty colours including Burnt Umber, Smoke, Charred Brown, Rust, Saddle Brown, Leather brown. all applied as washes also washes of German orange and finally sponge stippling with Dark Prusion Blue to simulate a bit of residual original colour.