After all that I forgot to add that I also turned some replacement buffer stocks. Those familiar with Jim’s kits will know that to keep costs down Jim provides whitemetal buffers which can be sprung but it involves fitting a piece of spring wire through the back of the coupling hook and then to the rear of the buffers. Although I used this method on a few of my early builds having broke one of the cast heads of a buffer rather put me off the idea so now I add sprung buffers and I usually solder the coupling hook solid.

I had some spare buffer heads (kindly supplied by our very own Mr Moss as when received from NER Days they were unusable without further machining which Mossy isn’t equipped to do) which are fitted with 10ba nuts so the shank is a bit thicker than the 12 or 14ba that most comercial wagon buffers are fitted with. I did drill out one of the white metal buffer stocks and I did make it ft but the walls were very thin. I decided to turn replacements from some 14″ nickel rod. Although the finished dimensions were the same as the whitemetal examples the nickel replacements are much more substantial.

So now The van just needs these fitting, some sand pipes and coupling chains and a good clean up before painting.